Dear SCOMB Community, The GitLab runners for the project are now set up, and an initial full build test has been completed successfully. You can access the generated images for testing at: http://94.198.185.40/sonic-images/<http://94.198.185.40/sonic-images/> These builds include telemetry and MCLAG support in addition to the default features. Further details can be found here: https://gitlab.com/alasca.cloud/scomb/sonic-guides/-/blob/main/SONiC%20config%20Command%20%E2%80%93%20Feature%20Overview.md?ref_type=heads<https://gitlab.com/alasca.cloud/scomb/sonic-guides/-/blob/main/SONiC%20config%20Command%20%E2%80%93%20Feature%20Overview.md?ref_type=heads> To test your own changes: * Pull from the |master-ci-pipeline| branch * Add your changes locally * Update the |.gitlab-ci.yml| configuration as needed (e.g., enable/disable features) * Push your changes to trigger a new build Note: For a faster build process the unit tests can be disabled for debugging setups. Please feel free to test the images and validate the runner setup. If you encounter any issues, kindly report them via the project issue tracker. Best regards, Rankan Sen Cloud&Heat Cloud&Heat Technologies GmbH Königsbrücker Straße 96 (Halle 15) | 01099 Dresden *+49 351 479 367 00* *rankan.sen@cloudandheat.com | **www.cloudandheat.com* <https://www.cloudandheat.com> *Green, Open, Efficient.* Ihr Cloud-Service- und Cloud-Technologie-Provider aus Dresden. <https://www.cloudandheat.com/> Commercial Register: District Court Dresden Register Number: HRB 30549 VAT ID No.: DE281093504 Managing Director: Nicolas Röhrs Authorized signatory: Dr. Marius Feldmann
